Get Your Free Quote…!
Electric Control Cabinet for Temperature Control : High Accuracy PID controller, guarantees the working temperature control accuracy.
Heating Control Method : Silicon controlled voltage regulator controls the voltage of both sides of the heater to change the heating temperature.
Motor Control : AC Inverter Drives with Synchronization for controlling all the three motors, they are, two thickening roller motors and one haul off roller motor, so that, it can adjust and choose the rotating speed as needed by the working conditions.
Production Efficiency : 1000-2000m/h
Width of Product（Max） : 1500mm
Overall Size : 8000mm x 2300mm x 2000mm
Mounted power : 40kw @ 440 Volts / 50 Hz.
Total weight : 2.5t
Utility Rquirements : Compressed Air : 0.2～0.4 m3/min, 0.6Mpa
Size of Thickening Roller : 192mm×1600mm
Material of Thickening Roller : Steel.
Open and Close method of Thickening roller : Motorized up and down of Two Rolls.
Drive power : 1.1kW x 3
Driving method : Gear box driven by Motor, Direct Transmission, Easy Operation, Safety and Beauty.
Heating Method : Electric Heating
Heating Box One Set : Composed of 10 Heaters
Heating Power : 3.5kW x 10 pcs
Air Engine Power : 1.5KW
Needle Roller : 100mm x 1600mm
Haul-Off roller : 100mm x 1600mm
Haul-Off Material : Rubber
Open and Close Method : Driven by Cylinder.
Winding Method : Torque Motor Control
Winding Motor Torque : 16Nm
Electric Control Cabinet for Temperature Control : High Accuracy PID controller, guarantees the working temperature control accuracy.
THeating Zone : 8 nos.
Heating Control Method : Silicon controlled voltage regulator controls the voltage of both sides of the heater to change the heating temperature.
Motor Control : AC Inverter Drives with Synchronization for controlling all the three motors, they are, two thickening roller motors and one haul off roller motor, so that, it can adjust and choose the rotating speed as needed by the working conditions.
Other Features : Equipped with Length-Meter counter & Alert-Buzzer System. Length can be freely set as needed. After reaching the set length, the meter counter will give signal.